For aluminium and copper conductors
- Wide range of insulation-piercing and torque-setting clamps
- For aluminium, copper and ACSR conductors
- Conductor cross sections from 16-150 mm2 (main) and 4-150 mm2 (branch)
-
-
For insulation, protection and identification of LV cables and busbars
- Thin wall tubing shrink ratio 2:1 for diameter 1.5 to 100 mm
- Medium wall tubing shrink ratio 3.5:1 for diameter 12 to 140 mm
- Medium wall tubing is adhesive lined and suitable for LV cable jacket applications
-
For transformer bushings and other applications
- One size fits most New Zealand bushing types and sizes
- For low voltage application
- Operating temperature up to 120°C
-
For cable diameters from 15 to 160 mm
- High shrink ratio: six sizes cover all diameters from 15 to 160 mm
- Available in 500 mm and 1,000 mm lengths
- Ideal LV cable joint outer protection and repair
-
Bolted Connectors for Ground Mounted and Pole Mounted Transformers
- Direct connection by set screw onto bushing stud or bolted to bushing palm
- Compliant with ANSI C119.4 Class A for copper and aluminium conductors
- Conductor sizes from 16 to 120 mm2
-
Heavy Duty Connectors with Bolted Lay-In Cable Clamps
- Lay-in cleats make connection of up to four cables per phase quick and convenient
- Compliant with ANSI C119.4 Class A for copper and aluminium conductors
- Conductor sizes from 35 to 500 mm2
-
The cable connector system for voltages up to 36 kV
- Branch connectors, in-line connectors and offset and centre palm lugs
- Bolts always break at the surface of the clamp leaving no protrusions to be filed down
- Conductor sizes from 10 to 630 mm2
-
For retrofit earthing of hollow spun concrete pole reinforcing cage.
- Designed for retrofit application on hollow-spun poles and other structures
- Short circuit rated to 10 kA x 0.5 s
- Robust, stainless steel construction
-
The original New Zealand line tap tried and trusted by overhead lines engineers and linesmen since 1959
- Type tested for 1,000 hours thermal cycling to BS 3288-1:2014
- Five sizes cover all conductors from 4 mm2 to 120 mm2
- High torque setting, robust design, tried and trusted since 1959
-
Termination connectors to suit copper conductors.
- Compliant with AS/NZS 4325 Part 1:1995
- Lugs up to 630 mm2 and links up to 300 mm2
- Tensile strength at least 205 MPa
